Yes! The part number TS-0550-3109 does just that, allowing you to upgrade either a CompGate40 or HyperGate45 to HP spec. The only limitation is we’re only making the HP option in Black, so while it will physically fit on any colour, the top cap will have to be black if you’re after HP features.

Unfortunately No! The GenV architecture is unique as it was a ground-up development and has no parts in common with the previous version.

You will get a 10psi innerspring and a 25 psi outer spring. This is the same combination when buying a full HP product off the shelf.

You effectively have 5 options; 10psi, 25psi, 35psi, 40psi & 50psi with the use and combination of just 3 springs. And remember, this is just base mechanical spring pressure. Much higher levels of boost can be achieved with some boost control or reference manipulation.

Almost – While the 10psi & 25psi come pre-fitted in the gate, there is an optional 40psi spring (TS-0550-3112) available as an accessory.

How much do you get? All setups are different and to answer this question, it’s best to acknowledge how much exhaust back pressure impacts boost control. On an efficient setup, you should be able to achieve between 2 and 3 times the base mechanical spring pressure. However, if you’re really working a turbo, efficiency tends to drop off and back-pressure rises making things a lot harder. It really does come down to your combination.

Not necessarily. The Water cooling feature is there simply as an option. The Gen-V architecture provides class-leading thermal management so it’s our experience most users will never need it. Its there in case you’re one of the chosen few finding the limits though.