eBoost3 Head Unit Black

How hard is it to replace my eBoost 2 with the eBoost 3?

As easy as it gets, the eBoost 3 has been designed to be a plug and play replacement for the eBoost 2. It's dimensoinally similar and the wiring connections are all in the same location. Just unplug your eBoost 2 and plug in the eBoost 3 and you are ready to start turning up the boost in a whole new way!

What’s the first rule of boost control?

Ensure you have an over-boost cut-out. This safety feature is built into all factory, aftermarket & programmable ECUs. The eBoost Range has an Over-Boost Shutdown feature built in as well – You can never be too careful. Make sure it is set at a sensible & reasonable limit. Increasing the Boost will put more load on your engine, and there are other tune-related factors you must always consider. If in any doubt, speak with a professional tuner/calibrator.

Can I use this on any turbocharged engine?

If your engine is turbocharged and uses a boost-based actuator for control, then yes. This Boost Controller will work on boost-based internal wastegate actuators and external wastegates.

How much Boost can I add?

This will come down to the rest of your setup & tune. If in any doubt, we recommend you contact a professional tuner or workshop for advice here.

What is Gate Feature?

Gate Feature is a unique Turbosmart feature that ensures our boost controllers can give you the best possible response. Turbosmart’s Boost Controllers can provide the most aggressive boost curve by manipulating the pressure signal into your actuator.

How Many Boost Levels Can I have?

The Turbosmart eBoost Street has 2 levels & the Eboost2 has 6. You can trigger these in several ways, including Boost by gear.

What sizes are Available?

eBoost Street: ¼ Din

eBoost2: 60mm

eBoost2: 66mm / 2 5/8”

How much Boost Can it Control?

eBoost Street: Up to 40psi

eBoost2: Up to 60psi

eBoostHP: Up to 120psi